Sloped, dipped or uneven floor? We pour self-leveling underlayment to create a dead-flat, sound surface — ready for tile, vinyl plank, polish or coatings.
Almost every flooring problem starts with an uneven slab. Tile lippage, vinyl plank that flexes and clicks, polished floors with visible low spots — they all trace back to a surface that wasn’t flat to begin with. Self-leveling underlayment fixes it: a flowable, fast-setting topping that finds its own level and cures into a smooth, hard, bondable surface.
Designer Concrete levels floors across Metro Vancouver — feathering out dips, correcting slopes, and building up low areas before your new floor goes down. Whether you’re heading toward tile, luxury vinyl, polished concrete or a coating, we hand you a flat slab that makes the finish look right.
Self-leveling underlayment is a calm, predictable process. Here’s exactly how we get from a wavy slab to a finish-ready surface.
We check flatness, moisture and bond. Old coatings come off, the slab is shot-blasted or ground, cracks and joints repaired, then primed so nothing debonds later.
A flowable, fast-setting underlayment is poured and spread. It finds its own level — filling dips, correcting slope and building low areas into one dead-flat plane.
Walk-on in hours. The cured surface is smooth, hard and bondable — handed off flat for tile, luxury vinyl, polish or coatings.
Recognise one of these before you lay a new floor? A flat slab fixes it at the source. Tick the boxes that sound familiar.
Get a free flatness assessment →Flowable topping that creates a dead-flat surface for any floor.
Build up low areas and correct drainage or settling slopes.
Feather out localized dips for lippage-free tile and vinyl.
Vapour barriers under levelling where slab moisture is high.
Repair and prep the slab so the leveler bonds and stays put.
Prepped flat for tile, vinyl plank, polish or coatings.
A surface flat enough for large-format tile and seamless polish.
Walk-on in hours, floor over the same or next day.
Primed and prepped so the leveler never debonds.
Tile, vinyl, polished concrete or coatings.
Leveled a wavy slab so luxury vinyl plank laid flat and quiet.
Corrected slope to eliminate lippage on large-format tile.
Feathered dips so a polished floor read perfectly flat.
Part of Designer Concrete, serving Vancouver, North Vancouver, West Vancouver, Burnaby, Coquitlam, Surrey, Langley, Delta, Squamish, Whistler and the wider BC region.
From a few millimetres of lippage up to significant slopes — we feather thin and build up thick as the job needs.
Most self-levelers are walk-on in 2–4 hours and ready for flooring the same or next day.
Yes — we shot-blast or grind and prime first, which is the step that keeps it bonded for good.
We can — though for a true polished look we’ll discuss whether to polish the slab or a suitable topping.
Call 604-724-7224 or send the form — we’ll reply with a free, no-obligation quote.